PTPGM1009

PTPGM1009 is a PTP Grandmaster Clock which is fully compliant with IEEE1588-2008 Standard and compatible with PolyNet PW1008HG Primary Reference Clock.

• Supports wide range of PTP features including Unicast, Multicast and Hybrid PTP operation modes
• Available with both balanced and unbalanced TDM interfaces
• Serves as PTP, SyncE and TDM clock
• 8 x 2 MHz and 8 x 2 Mbps (E1) output interfaces for TDM sync
• 2 x 1PPS
• 2 x ToD RJ45
• 1 x SFP 1G optical and/or electrical SyncE/PTP interfaces
• Serves up to 1,024 PTP clients at full packet rate
• Multiband GNSS receiver

PTPEM1009

The PTPEM1009 is a PTP Edge Master Clock which is fully compliant with IEEE1588-2008 Standard. The Edge Master supports wide range of PTP features including Unicast, Multicast and Hybrid PTP operation modes.

• Serves as PTP, SyncE clock
• 2 x SFP 1G optical and/or electrical SyncE/PTP interfaces
• Serves up to 64 PTP clients at full packet rate
• 1 x 1PPS and 1 x 10 MHz outputs
• Multiband GNSS receiver

NTP1004

NTP1004 is a carrier-class GNSS-based Stratum 1 Network Time Server. The compact and robust construction allows easy and quick installation, while the maintenance-free operation make it an ideal solution for telecoms and cable TV operators, as well as IPTV and internet service providers.

E1 SPLITTER

The E1 Splitter is a multi-purpose and yet very simple solution for the network operation teams. The 2.048 Mbps, HDB3 coded E1 signal it receives on its input port is amplified and distributed to the eight outputs without modifying the data content or the frame structure. It has ben developed for larger network stations where the number of available synchronization-purpose E1 channels are limited. By multiplying one of the synchronization purpose E1 channel into eight identical timing signal the station’s network elements can be easily synchronized.

2MHz SPLITTER

The 2MHz Splitter has been designed to distribute a single 2MHz reference signal into eight 2MHz output signals to multiple devices. Its port-to-port isolation, as well as its minimal through loss makes this splitter a must for communication systems, satellite earth stations, VSAT broadcast operations and test centers.

Splitting 1 to 15 is also available with the dual version.

The unit is housed in a 1U high and 19″ wide shelf, and is available in dual power supplies (optional).

10MHz SPLITTER

The 10MHz Splitter has been designed to distribute a single 10MHz reference signal into eight 10MHz output signals to multiple devices. Its port-to-port isolation, as well as its minimal through loss makes this splitter a must for communication systems, satellite earth stations, VSAT broadcast operations and test centers.

Splitting 1 to 15 is also available with the dual version.

The unit is housed in a 1U high and 19″ wide shelf, and is available in dual power supplies (optional).

PCAC1000 Atomic Clock

As optically pumped Cesium-beam frequency standard, the PCAC1000 has the high frequency accuracy and stability for both laboratory and field applications. A stability specification for 30-day averaging time means the PCAC1000 will keep extremely predictable time and phase for long periods. Further, the long-term averaging of noisy signals can be tested by the outputs of 10MHz sine, 5MHz sine & 1PPS in PCAC1000

PTEST 5G

Ptest 5G is a portable network synchronization analyzer for TDM and packet networks. It also works as an Ethernet traffic generator and analyzer conceived to rate conformance and performance of native Ethernet networks or Ethernet services.

• Suitable for testing in environments where packet switching has not totally replaced legacy circuit switching technology, like in some cellular networks.
• Optimal for laboratory applications and field applications which require versatile and reliable operation.
• Fully compliant with SyncE (Synchronous Ethernet) and PTP  IEEE 1588v2 standard.

Sync Performance Monitoring System – SPMS

Accurate timing has become increasingly important in today’s modern networks. Ensuring phase, frequency and time-of-day synchronization in the network requires central visibility and continuous monitoring of timing devices. Our Sync Performance Monitoring System (SPMS) helps network operators maintain this mission-critical timing environment.

• Real-time monitoring and statistics according to standards
• Real-time alert setting
• Vendor independent
• Remote access
• User friendly graphical interface

Sync Management System – CLOCKVIEW

Each member of PW 1010, PW 1009 and PW 1008 product family can be managed via local terminal and from centralized network management. The user interface for parameter settings and controlling screens are identical in both cases, which makes the configuration settings the same from local and remote.

• Centralized management of synchronization network elements
• Alarm, configuration and quality management
• Event and operator activity logging
• User-friendly GUI